admin

December 10, 2019

Our worm gear reducers offer a choice of a good or hollow output shaft and feature an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can endure shock loading better than other reduction gearbox styles, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Swiftness Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s rate reducer products – has been serving industry reliably for over 40 years. Its tested modular style has set the market standard for performance and is the most imitated product in the current worm gear acceleration reducer marketplace. But why settle for a knock-off when you’re able to have the initial – from EP Gear.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting flexibility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, along with greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
GEARBOX REDUCERS
Right angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (worm reduction gearbox PARALLEL shaft and planetary) are a perfect match for motors with high insight speeds, or when gearmotor efficiency is important. Contact our technical sales staff for help identifying which gearbox option is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers were created with a hollow bore and invite for a corner change with optional dual output. The reducers come in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes were created with five mounting choices providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the top features of our right angle worm and planetary inline reducers. With a good and efficient correct angle configuration, our correct angle planetary gearboxes provide a robust solution. The proper angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations provide the smallest footprint and quietest procedure of our swiftness reducers. These gearboxes are designed to deal with varying loads with small backlash. With frame sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size can be available with plastic-type gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest effectiveness and best output torque of all our speed reducers. These gearboxes are made to deal with varying loads with little backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we have a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes are the top choice for continuous duty applications. Their gear cluster design provides an effective method for dissipating temperature. Parallel shaft gearboxes possess the shortest amount of our inline gear reducer options so they work very well in environments with limited space. Our parallel shaft equipment reducers provide an affordable drop-in alternative solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, swiftness reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement in which a gear in the form of a screw, also referred to as a worm, meshes with a worm equipment. These gears are usually created from bronze and the worms are steel or stainless steel.

While worm gears act like a spur gear, the worm gearboxes are significantly smaller than other gear reduction boxes. A primary benefit of worm gear reducers is that they create an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Most often, a worm gearbox has right hand threads; to change the path of the output, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio