admin

December 18, 2019

Tensioner & Idler Bearing
Predicated on advanced bearing technology Ever-power tensioner and idler bearings possess met rigorous requirements from car manufactures like Hyundai Motor, Kia Motors, Volks Wagen and so forth for many years. Our design idea is as follows.
Optimal materials selection for temperature use
Ideal sealing design to avoid grease leakage
Low torque engineering to reduce excessive seal friction
Grease selection for high temperature and extended use
Optimal clearance
Tolerance control to accomplish correct alignment
Automatic defect detectors are installed along the way. Rigorous quality control enables us to target zero defect. We cover wide range of car makers and models with an increase of than 500 part quantities. Ever-power enjoys OE reputation in global aftermarket.
Features of Tensioner & Idler Bearing
Tensioner bearing
Belt driven outer ring system is inherent in this design. Tensioner bearing is placed at slack aspect.(Idler bearing at limited side) There are numerous styles according to engine types.
Functions
· To supply belt with tension
· To transfer driving push from crankshaft
· To prevent belt slippage
· To prevent noise due to off-line belt
· To reduce space of belt layout
Structure
Tensioner and idler bearing consists of basic elements like inner ring, outer band, retainer, grease and seal. Pulley could be added to adapt rotation ratio. Bracket could be added to adjust location for adding pressure. Races are one of the bearing element parts. It has grooved monitor for balls to find. Outer race and inner race make a set. Inner race is located on sub-assembly device and outer competition is defined on housing. Pulley could be added on outer race to provide timing belt system with designed revolution rate. Rolling component is “ball” running between races. Retainer shifting along with balls separates person ball into placement. Also grease has essential role to reduce friction and essential oil seal serves to hold grease and shut international particles from intrusion.

A tensioner is a gadget that applies a force to create or maintain pressure . The force could be used parallel to, as regarding a hydraulic bolt tensioner, or perpendicular to, as regarding a spring-loaded bicycle chain tensioner, the strain it generates. The force could be generated by a fixed displacement, as regarding an eccentric bicycle bottom bracket , which must be altered as parts put on, or by stretching or compressing a springtime , as in the case of a spring-loaded bike chain tensioner; by changing the volume of a gas, as regarding a marine riser tensioner; by hydraulic pressure, as regarding a hydraulic bolt tensioner; or by gravity functioning on a suspended mass, as regarding a seat lift cable tensioner. In the power sector, the can be a machine for maintaining constant pressure of the conductors during work of hanging the tranny network.

A tensioner pulley manuals the belt around the tensioner and allows the belt to spin as the tensioner maintains pressure against it. A failing tensioner pulley can cause power loss and damage to your belt-powered systems. You might have a failing tensioner pulley if you hear any squeaking or squealing under the hood. Bearings on the pulley can degrade, causing noise and heat. Pulleys are usually manufactured from either plastic or metallic, so check the pulley itself for just about any damage as well. For Auto parts, we have tensioner pulleys designed for many vehicle models. Have a look at our options and look for a tensioner pulley for your vehicle, truck, or SUV.

Ever-power is a leading manufacturer of Original Tools (OE) idler pulleys. Ever-power Idler Pulleys fulfill or exceed OE specs. High quality, high strength bearings run cooler and go longer than initial bearings. Ever-power Idler Pulleys are designed to last by resisting dirt, salt, and additional under-hood contaminants. Designed for make use of on automobiles and light trucks as locked middle tensioning, automatic belt tensioning and idler pulleys.
Additional hardware incorporated with many idler pulleys to make installation easier.
Original Equipment (OE) Precise – Looks and fits similar to the OE
Bearing meets or exceeds OE specs and is created for application-specific speed and load requirements
Steel or thermoplastic building provides high sturdiness for extended life
Industry’s best light-duty coverage and consistently first to advertise for late model application coverage
Vibration damping program extends lifestyle of tensioner and other accessory components
Reliable operation under serious conditions
For the past years Ever-power has been powering improvement as one of the worlds leading parts manufacturers in the automotive industry, dealing with virtually every Original Equipment Manufacturer worldwide to create products for new vehicles as they are being developed. These solid relationships as well as Ever-power commitment to continuous innovation allow us to offer a complete type of OE quality items for the Aftermarket. From Timing Belts to Micro-V AT Belts, Tensioners and Hose, for both import and domestic automobiles, install with confidence, install Ever-power.
At Ever-power, we provide different types of Idler wheels with high quality which can meet your standard and needs.
For more details of our products, please go to the following link for pdf form of our products.
Tensioners and Idlers.pdf